Stain WranglersStone + tile restoration
Call or text(480) 259-8178Get an assessment

Quartzite restoration

Quartzite Sealing in San Tan Valley and the East Valley

Quartzite sealing for counters, islands and vanities that darken when water sits on them. We test the stone first, clean and remove stains, then seal the top and the raw cut edges where water gets in. Free in-home estimate.

Estimates are free and in person, because the right answer depends on the stone.

Call (480) 259-8178Text a photo of your quartzite
Water droplets beading up on a sealed quartzite countertop surface

Google Reviews

More than 100 reviews with a five-star rating.

5.0100+ Google reviewsWrite a review
Tami EmmettVerified on Google
“Wonderful business. My counters and floors look awesome! Justin is professional and personable.”
Chelsey RaneyVerified on Google
“Wonderful service and the customer service is top notch! They got my floors spotless, which with 4 dogs is no easy task! Highly recommend!”
Tracey TomaszewskiVerified on Google
“AMAZING!!! Looks like I got brand new floors! Thank you. Would highly recommend”
Tiffany HarrisVerified on Google
“I highly recommend his floor cleaning services! He's reliable, professional, and does an excellent job. My floors looked amazing, and I couldn't be happier with the results.”
annette cressVerified on Google
“Stain Wranglers are honest, reliable and trustworthy. They have impeccable work ethic and will treat you fairly. Please give them a try.”
Richard ChurchVerified on Google
“Outstanding customer service! So refreshing to use a company that carries very high standards. Stain Wranglers exceeded our expectations. A+”
TravisVerified on Google
“Highly recommend! On time, great service, and very professional. Very meticulous in their work.”
Johnny AldacoVerified on Google
“When you meet someone, with character you know!! This is what my first impression was of Stain Wranglers, will use them over and over and spread the word to everyone. Thank you”
keaton angevineVerified on Google
“Justin was quick to show up and get the job scheduled. He worked hard to get our home clean and followed up after he was done to make sure we were happy. Customer service at its finest! Highly recommended”
Teresa WrightVerified on Google
“Justin is super friendly and explains everything thoroughly. Def would recommend!”
Watch customer video responses See all reviews on Google

Does your slab need it? Test, do not guess

Quartzite varies widely. Some slabs are so dense that water beads on them with no sealer at all; others drink it in. A calendar cannot tell you which you have. A drop of water can.

  • Put a few drops on the stoneTry the open top, an edge near the sink and a spot by the cooktop.
  • Wait 10 to 15 minutes, then wipeIf the stone underneath has darkened, it is absorbing and sealing will help.
  • No change?The stone is dense or still sealed. Adding more sealer will only sit on top.
Water drop test on unsealed quartzite, with a dark wet patch spreading into the stone around the drops

Seal the edges, not just the top

Most water darkening on quartzite starts at a cut: the sink cutout, a mitered edge or a seam.

Those edges are cut after the slab is finished and are often left raw, while the face may carry factory resin. Water gets in from the side and cannot dry out through the top. We seal the faces of the sink cutout and the exposed edges as well as the surface. If a band has already formed, it comes out first through stain removal, because sealing over it locks it in.

Small orange rust spot blooming from inside a pale quartzite countertop

What sealer can and cannot do

A penetrating sealer sits in the pores of the stone and slows how fast liquids soak in. That buys you time to wipe up a spill.

  • Not stain-proofOil or wine left for hours can still get in.
  • No help with etchingSlabs that etch are dolomite or marble; see quartzite vs. marble.
  • No help with rust from withinIron minerals inside some slabs can still bloom through.
  • Too much causes hazeExcess left to dry leaves a cloudy, sticky film, so every bit is wiped off.

What to expect when we work on your quartzite

  1. Identify the stone and test it

    We confirm the slab type and run a water drop test on the top and the edges.

  2. Clean and deal with stains

    Residue is cleaned off and any dark marks are drawn out, so nothing gets sealed in.

  3. Seal the top, edges and cutouts

    A penetrating sealer goes on where the test showed absorption, with every bit of excess wiped off.

  4. Retest and hand over

    We check the result with water and tell you how long to keep the surface dry.

Get an estimate for your quartzite

Your estimate depends on how much stone there is, what the water drop test shows, how many cut edges and cutouts need attention, and whether stains or old sealer residue have to come off first. We test the slab in person and set out the scope before any work starts.

Send a photo of the whole surface and a close-up of the mark, with your city and any products already used. Photos help us plan the visit; we test the stone before confirming the work.

Based in San Tan Valley, we serve Queen Creek, Gilbert, Mesa and Chandler, along with the rest of the East Valley.

Text photos for an estimateCall to discuss your quartzite

Questions before booking

Will sealing change how my quartzite looks?

A penetrating sealer soaks into the stone and should not change its look. Some sealers deepen the color slightly, and we test a small area first if you want to see it. Haze only appears when excess is left to dry on top.

How long does it take, and when can I use the counter?

Testing, cleaning and sealing a kitchen is usually one visit. The counter then stays dry for the cure time on the sealer's label, and we tell you that time before we leave.

How often does quartzite need sealing?

Test it rather than following a calendar. If a drop of water darkens the stone within 10 to 15 minutes, it is absorbing and sealing will help. Dense slabs may go years, or never need it.

Will water darkening come back after sealing?

Sealer slows absorption; it does not stop it. Water left standing at a raw edge or around the faucet can still darken the stone, so dry those areas and retest every so often.

Does sealing stop etching?

No. Etching is acid reacting with calcite in the stone, and sealer does not stop that. True quartzite does not etch; slabs that do are dolomite or marble, and sealing will not change that.

Hear directly from our customers

Real customers describing their experience with Stain Wranglers after the work was finished.

A customer shares her experience with Stain Wranglers.
A local restaurant owner after a commercial floor-cleaning job.

Request an assessment.

Tell us about your surface and what you’re seeing. We’ll help you work out the next step for your home or commercial property.

  • Stone, tile, floors and countertops
  • Residential and commercial, San Tan Valley & the East Valley, AZ
  • No charge to have us look at it
Prefer to call or text? (480) 259-8178
Call usText a photo

Email stainwranglers@gmail.com

Having trouble with the form? Open it in a new tab.