Quartzite restoration for counters, islands and vanities that have darkened at the sink, dulled in the work zone, stained or chipped. We find out what the stone really is, then treat the stone itself; nothing is coated over. Free in-home estimate.
“Wonderful business. My counters and floors look awesome! Justin is professional and personable.”
“Wonderful service and the customer service is top notch! They got my floors spotless, which with 4 dogs is no easy task! Highly recommend!”
“AMAZING!!! Looks like I got brand new floors! Thank you. Would highly recommend”
“I highly recommend his floor cleaning services! He's reliable, professional, and does an excellent job. My floors looked amazing, and I couldn't be happier with the results.”
“Stain Wranglers are honest, reliable and trustworthy. They have impeccable work ethic and will treat you fairly. Please give them a try.”
“Outstanding customer service! So refreshing to use a company that carries very high standards. Stain Wranglers exceeded our expectations. A+”
“Highly recommend! On time, great service, and very professional. Very meticulous in their work.”
“When you meet someone, with character you know!! This is what my first impression was of Stain Wranglers, will use them over and over and spread the word to everyone. Thank you”
“Justin was quick to show up and get the job scheduled. He worked hard to get our home clean and followed up after he was done to make sure we were happy. Customer service at its finest! Highly recommended”
“Justin is super friendly and explains everything thoroughly. Def would recommend!”
Dark bands at sink cutouts, mitered edges and seams, oil spots by the cooktop and rust blooms, drawn out of the stone rather than covered.
Worn work zones and hazy patches refined with diamond abrasives, worked wet. Honed and leathered slabs go back to their own texture.
A water-drop test tells us whether the slab needs sealing. We seal the cut edges and sink faces too, not just the top.
Chipped sink rims and edges, cracks from cutouts and overhangs, and opened seams, filled with resin tinted to the stone and finished to match.
Our full countertop guide: how quartzite behaves, the four kinds of mark, and how we work out which repair your counter needs.
Compare the mark with the stone around it.
Water, oil or sealant bleed has wicked into the slab, most often from a raw cut edge at the sink, a mitered edge or a seam. It is drawn out, not polished.
Grit and daily use wear the finish flat where you work most, or a film of cleaner sits on top. Diamond polishing or a proper clean brings it back.
True quartzite does not etch. A dull acid mark means the slab is likely dolomite or marble, and it needs the care that stone needs.
Slab yards use the name loosely. Many slabs sold as quartzite, including some called "soft quartzite," are dolomite or marble.
True quartzite is sandstone recrystallised into solid quartz, about 7 on the Mohs scale, and food acids do not touch it. Dolomite and marble etch, and they take different abrasives. We confirm the stone before choosing any chemistry or pad. Our guide to quartzite vs. marble shows how to tell, and cleaning quartzite counters covers daily care.
We confirm true quartzite, dolomite or marble, and whether it is polished, honed or leathered.
We trace where water or oil got in, and whether the face carries a factory resin.
A small test shows how the slab responds before we poultice, polish or seal.
We seal where the water drop test says it helps, then walk you through daily care.
Estimates are free and in person, because the right answer depends on the stone.
Send a photo of the whole surface and a close-up of the mark, with your city and any products already used. Photos help us plan the visit; we test the stone before confirming the work.
Based in San Tan Valley, we serve Queen Creek, Gilbert, Mesa and Chandler, along with the rest of the East Valley.
Usually it will look like well-kept quartzite: the dull patch blends in and most dark marks lift. Very old adhesive or oil bleed can leave a faint shadow, and we tell you which marks may stay before we start.
Polishing or sealing a kitchen is usually one visit. Drawing out a dark band takes longer, because the poultice has to dry and some stains need several rounds. We give you a time frame at the estimate.
Not if the cause is dealt with. Once the stain is out, we seal the cut edges and sink faces where water was getting in. A leaking faucet or failed caulk line needs fixing too, or water finds the same path.
True quartzite does not etch from lemon, wine or vinegar. A dull mark from an acid spill means the slab is most likely dolomite or marble sold as quartzite. It can still be restored, with the abrasives and care that stone needs.
A photo tells us a lot: whether a mark is darker or duller, where it sits, and how big the job is. We still test the stone in person before confirming the work, because the slab decides the method.
No. We restore the quartzite you already have. If a piece is beyond repair, we say so plainly, and you can bring in a fabricator for that piece.
Real customers describing their experience with Stain Wranglers after the work was finished.
Tell us about your surface and what you’re seeing. We’ll help you work out the next step for your home or commercial property.
Having trouble with the form? Open it in a new tab.
